PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1716H7FG
TA1716H7FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-3591, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1716H7FG
NSN: 5340-00-290-3591
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
material_document_and_classificationMIL-S-6721,COMP TI 321 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.568 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.380 INCHES NOMINAL IN
NSN5340-00-290-3591
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1716H7FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: GLASS FIBER CUSHION
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721,COMP TI 321 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.380 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALGLASS FIBER CUSHION
SURFACE TREATMENTPASSIVATE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721,COMP TI 321 MIL SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIALSTEEL CORROSION RESISTING BAND
OVERALL WIDTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.380 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
4717Interchangeable
interchangeable cross-reference
interchangeable
DP5S3Interchangeable
interchangeable cross-reference
interchangeable
3137Interchangeable
interchangeable cross-reference
interchangeable
347-005Interchangeable
interchangeable cross-reference
interchangeable
KIT4717Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1716H7FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1716H7FG?
TA1716H7FG is a CLAMP,LOOP.
What parts can replace TA1716H7FG?
There are 5 known substitutes for TA1716H7FG: 4717, DP5S3, 3137 and 2 more. Substitute compatibility should be verified for your specific system.
Is TA1716H7FG still available?
TA1716H7FG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1716H7FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026