PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1716H18FG
TA1716H18FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND, material_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-685-0361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1716H18FG
NSN: 5340-00-685-0361
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter1.125 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.172 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.954 INCHES NOMINAL IN
NSN5340-00-685-0361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1716H18FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.172 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.954 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.172 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
STYLE DESIGNATOROFFSET MOUNT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.954 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.125 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MIL-M-40122Interchangeable
interchangeable cross-reference
interchangeable
47118Interchangeable
interchangeable cross-reference
interchangeable
A-A-1954Interchangeable
interchangeable cross-reference
interchangeable
743-600256Interchangeable
interchangeable cross-reference
interchangeable
DIN471-18-EInterchangeable
interchangeable cross-reference
interchangeable
J47118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1716H18FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1716H18FG?
TA1716H18FG is a CLAMP,LOOP.
What parts can replace TA1716H18FG?
There are 8 known substitutes for TA1716H18FG: MIL-M-40122, 47118, A-A-1954 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA1716H18FG?
TA1716H18FG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-685-0361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1716H18FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026