PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1716H04FG
TA1716H04FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLORALUMINUM, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3047, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1716H04FG
NSN: 5340-00-200-3047
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLORALUMINUM
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cushioning_environmental_protectionFUEL, AROMATIC
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.693 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.505 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
NSN5340-00-200-3047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1716H04FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.693 INCHES NOMINAL IN
•
MATERIAL: GLASS FIBER CUSHION
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.505 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END0.693 INCHES NOMINAL IN
MATERIALGLASS FIBER CUSHION
MATERIALSTEEL CORROSION RESISTING BAND
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.505 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
DIAMETER0.204 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
SPECIAL FEATURESCOLORALUMINUM
DIAMETER0.204 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
4714Interchangeable
interchangeable cross-reference
interchangeable
96011-31Interchangeable
interchangeable cross-reference
interchangeable
D15-518VPC493Interchangeable
interchangeable cross-reference
interchangeable
D15-561BPC573Interchangeable
interchangeable cross-reference
interchangeable
D15-518NPC493Interchangeable
interchangeable cross-reference
interchangeable
44062HAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1716H04FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1716H04FG?
TA1716H04FG is a CLAMP,LOOP.
What parts can replace TA1716H04FG?
There are 22 known substitutes for TA1716H04FG: 4714, 96011-31, D15-518VPC493 and 19 more. Substitute compatibility should be verified for your specific system.
Is TA1716H04FG still available?
TA1716H04FG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1716H04FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026