PartsTable
Technical Data Sheet
Download PDF

TA12C59WH36HB — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TA12C59WH36HB: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.100 INCHES NOMINAL IN, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-373-6469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA12C59WH36HB
NSN: 5340-01-373-6469
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 BAND
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.100 INCHES NOMINAL IN
surface_treatmentPASSIVATE BAND
loop_inside_diameter2.235 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.756 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.523 INCHES MINIMUM AND 1.553 INCHES MAXIMUM IN
NSN5340-01-373-6469
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA12C59WH36HB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.100 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.756 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.523 INCHES MINIMUM AND 1.553 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.100 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.756 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.523 INCHES MINIMUM AND 1.553 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 BAND
MATERIALRUBBER SILICONE CLASS Q AND GLASS FIBER CUSHION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
920SS2-36Reference document
Same NSN cross-reference
Reference document — Secondary reference
JM44LC50WH036FHReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TA12C59WH36HB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA12C59WH36HB?
TA12C59WH36HB is a CLAMP,LOOP.
What parts can replace TA12C59WH36HB?
There are 2 known substitutes for TA12C59WH36HB: 920SS2-36, JM44LC50WH036FH. Substitute compatibility should be verified for your specific system.
What is the NSN for TA12C59WH36HB?
TA12C59WH36HB is cataloged in the U.S. Government catalog under NSN 5340-01-373-6469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA12C59WH36HB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.