TA12C59H32T — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TA12C59H32T: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-377-9401, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TA12C59H32T

NSN: 5340-01-377-9401
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 321 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.040 INCHES NOMINAL IN
loop_inside_diameter	2.000 INCHES NOMINAL IN
material_document_and_classification	MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.623 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.405 INCHES NOMINAL IN
NSN	5340-01-377-9401

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.623 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-22241, TY 1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.623 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.405 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 3

LE127-0010-1032Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

920SS2-32Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JM44LC50H032TSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy TA12C59H32T?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TA12C59H32T?

TA12C59H32T is a CLAMP,LOOP.

What parts can replace TA12C59H32T?

There are 3 known substitutes for TA12C59H32T: LE127-0010-1032, 920SS2-32, JM44LC50H032T. Substitute compatibility should be verified for your specific system.

What is the NSN for TA12C59H32T?

TA12C59H32T is cataloged in the U.S. Government catalog under NSN 5340-01-377-9401. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TA12C59H32T — CLAMP,LOOP

Request a Quote — TA12C59H32T