TA11C99S15AY — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TA11C99S15AY: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-915-2005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TA11C99S15AY

NSN: 5340-00-915-2005
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	PLASTIC CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	CADMIUM BAND
material_thickness	0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter	0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
cushioning_environmental_protection	FUEL, AROMATIC AND HYDRAULIC FLUID
distance_from_loop_center_to_tongue_end	1.108 INCHES MINIMUM AND 1.168 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.890 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
NSN	5340-00-915-2005

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND HYDRAULIC FLUID

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.108 INCHES MINIMUM AND 1.168 INCHES MAXIMUM IN

•

SURFACE TREATMENT: CADMIUM BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	FUEL, AROMATIC AND HYDRAULIC FLUID
STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.108 INCHES MINIMUM AND 1.168 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.890 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 1010 BAND

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

JM44LC19S15ACSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

9M367-15Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy TA11C99S15AY?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TA11C99S15AY?

TA11C99S15AY is a CLAMP,LOOP.

What parts can replace TA11C99S15AY?

There are 2 known substitutes for TA11C99S15AY: JM44LC19S15AC, 9M367-15. Substitute compatibility should be verified for your specific system.

What is the NSN for TA11C99S15AY?

TA11C99S15AY is cataloged in the U.S. Government catalog under NSN 5340-00-915-2005. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TA11C99S15AY — CLAMP,LOOP

Request a Quote — TA11C99S15AY