PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA11C44D27T
TA11C44D27T ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: FED QQ-A-250/5 ALLOY ALCLAD 2024-T4, style_designator: OFFSET MOUNT, surface_treatment: ANODIZE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-097-4558, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA11C44D27T
NSN: 5340-00-097-4558
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialPLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresFED QQ-A-250/5 ALLOY ALCLAD 2024-T4
style_designatorOFFSET MOUNT
surface_treatmentANODIZE BAND
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
loop_inside_diameter1.673 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.485 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.267 INCHES NOMINAL IN
NSN5340-00-097-4558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA11C44D27T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE CUSHION
•
SURFACE TREATMENT: ANODIZE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.267 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.485 INCHES NOMINAL IN
•
DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC TETRAFLUOROETHYLENE CUSHION
SPECIAL FEATURESFED QQ-A-250/5 ALLOY ALCLAD 2024-T4
MATERIALALUMINUM ALLOY BAND
SURFACE TREATMENTANODIZE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.267 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.485 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.673 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
5232905Interchangeable
interchangeable cross-reference
interchangeable
37D401657P116Interchangeable
interchangeable cross-reference
interchangeable
37D401657P111Interchangeable
interchangeable cross-reference
interchangeable
C2874D27Interchangeable
Same NIIN cross-reference
interchangeable
5340PL1690994Interchangeable
Same NIIN cross-reference
interchangeable
5340PL0845396Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA11C44D27T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA11C44D27T?
TA11C44D27T is a CLAMP,LOOP.
What parts can replace TA11C44D27T?
There are 7 known substitutes for TA11C44D27T: 5232905, 37D401657P116, 37D401657P111 and 4 more. Substitute compatibility should be verified for your specific system.
Is TA11C44D27T still available?
TA11C44D27T is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA11C44D27T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026