PartsTable
Technical Data Sheet
Download PDF

TA11C44D14T — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TA11C44D14T: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-241-6693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA11C44D14T
NSN: 5340-00-241-6693
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialPLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.052 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.834 INCHES NOMINAL IN
NSN5340-00-241-6693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA11C44D14T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.052 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.834 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.052 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.834 INCHES NOMINAL IN
MATERIALPLASTIC TETRAFLUOROETHYLENE CUSHION
MATERIALALUMINUM ALLOY 2024 BAND
SUBSTITUTES & CROSS-REFERENCES 6
5340PL1745034Reference document
Same NSN cross-reference
Reference document — Informative reference only
5340PL0845414Reference document
Same NSN cross-reference
Reference document — Informative reference only
C2874D14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S280D14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340PL1691103Reference document
Same NSN cross-reference
Reference document — Informative reference only
JM44LC9D14TReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy TA11C44D14T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA11C44D14T?
TA11C44D14T is a CLAMP,LOOP.
What parts can replace TA11C44D14T?
There are 6 known substitutes for TA11C44D14T: 5340PL1745034, 5340PL0845414, C2874D14 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA11C44D14T?
TA11C44D14T is cataloged in the U.S. Government catalog under NSN 5340-00-241-6693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA11C44D14T