PartsTable
Technical Data Sheet
Download PDF

TA096-112U — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

TA096-112U: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_diameter: 5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN, contact_angle: 27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM, overall_width: 0.9600 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-319-5286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA096-112U
NSN: 3110-01-319-5286
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_diameter5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
contact_angle27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM
overall_width0.9600 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresBEARING IS DIPPED IN OIL; RETAINER IS FORMED WIRE,STRIP OR SEGMENTED,SNAP OVER TYPE,BALL IN EVERY POCKET
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter6.9995 INCHES MINIMUM AND 7.0000 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.5
material_document_and_classificationUNABLE TO DECODE
NSN3110-01-319-5286
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: TA096-112U · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 6.9995 INCHES MINIMUM AND 7.0000 INCHES MAXIMUM IN
•
CONTACT ANGLE: 27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH0.9600 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER6.9995 INCHES MINIMUM AND 7.0000 INCHES MAXIMUM IN
CONTACT ANGLE27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
SPECIAL FEATURESBEARING IS DIPPED IN OIL; RETAINER IS FORMED WIRE,STRIP OR SEGMENTED,SNAP OVER TYPE,BALL IN EVERY POCKET
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER5.9996 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
6499-304629-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TA096-112U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA096-112U?
TA096-112U is a BEARING,BALL,DUPLEX.
What parts can replace TA096-112U?
There is 1 known substitute for TA096-112U: 6499-304629-1. Substitute compatibility should be verified for your specific system.
What is the NSN for TA096-112U?
TA096-112U is cataloged in the U.S. Government catalog under NSN 3110-01-319-5286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA096-112U

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.