PartsTable
Technical Data Sheet
Download PDF

TA06302DC14EP — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TA06302DC14EP: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 0.5 INCHES NOMINAL IN, inside_diameter: 0.875 INCHES NOMINAL IN, special_features: CUSHIONED WITH BASE BAR, length_between_fasteners: 0.910 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: CLAMP, DOUBLE MOUNT, SINGLE TUBE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-728-8620, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA06302DC14EP
NSN: 5340-01-728-8620
FSC: 5340 — Hardware, Commercial
CAGE: 56271 — KIRKHILL-TA (USA)
SPECIFICATIONS
overall_width0.5 INCHES NOMINAL IN
inside_diameter0.875 INCHES NOMINAL IN
special_featuresCUSHIONED WITH BASE BAR
length_between_fasteners0.910 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP, DOUBLE MOUNT, SINGLE TUBE
NSN5340-01-728-8620
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA06302DC14EP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
LENGTH BETWEEN FASTENERS: 0.910 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.5 INCHES NOMINAL IN
INSIDE DIAMETER0.875 INCHES NOMINAL IN
SPECIAL FEATURESCUSHIONED WITH BASE BAR
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP, DOUBLE MOUNT, SINGLE TUBE
LENGTH BETWEEN FASTENERS0.910 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy TA06302DC14EP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA06302DC14EP?
TA06302DC14EP is a CLAMP,LOOP.
What is the NSN for TA06302DC14EP?
TA06302DC14EP is cataloged in the U.S. Government catalog under NSN 5340-01-728-8620. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA06302DC14EP