TA04C76WD09X — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TA04C76WD09X: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-720-6348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TA04C76WD09X

NSN: 5340-00-720-6348
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.563 INCHES NOMINAL IN
material_document_and_classification	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.862 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.674 INCHES NOMINAL IN
NSN	5340-00-720-6348

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.862 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.674 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.862 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.674 INCHES NOMINAL IN
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
MATERIAL	ALUMINUM ALLOY 2024 BAND

SUBSTITUTES & CROSS-REFERENCES 4

JM43LC14WD9XSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

385-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

C2037-9Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

S281-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy TA04C76WD09X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TA04C76WD09X?

TA04C76WD09X is a CLAMP,LOOP.

What parts can replace TA04C76WD09X?

There are 4 known substitutes for TA04C76WD09X: JM43LC14WD9X, 385-9, C2037-9 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for TA04C76WD09X?

TA04C76WD09X is cataloged in the U.S. Government catalog under NSN 5340-00-720-6348. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TA04C76WD09X — CLAMP,LOOP

Request a Quote — TA04C76WD09X