The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-243-6593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
TA02211H006HB1
NSN:5340-01-243-6593 FSC:5340 — Hardware, Commercial CAGE:84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
STEEL COMP 321 BAND
overall_width
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE BAND
material_thickness
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
loop_inside_diameter
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
cushioning_environmental_protection
FLAME RESISTANT AND HEAT
material_document_and_classification
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
0.796 INCHES NOMINAL IN
surface_treatment_document_and_classification
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN
5340-01-243-6593
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT AND HEAT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION
FLAME RESISTANT AND HEAT
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.796 INCHES NOMINAL IN
SURFACE TREATMENT
PASSIVATE BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA02211H006HB1?
TA02211H006HB1 is a CLAMP,LOOP.
What parts can replace TA02211H006HB1?
There are 3 known substitutes for TA02211H006HB1: S485WH6, RE127-2018-1006, 931W6. Substitute compatibility should be verified for your specific system.
What is the NSN for TA02211H006HB1?
TA02211H006HB1 is cataloged in the U.S. Government catalog under NSN 5340-01-243-6593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.