PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T88-108E
T88-108E ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, outside_diameter: 0.766 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.621 INCHES NOMINAL IN, cross-sectional_thickness: 0.281 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-530-7374, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T88-108E
NSN: 5330-00-530-7374
FSC: 5330
CAGE: 08018 — BORG-WARNER CORP (USA)
SPECIFICATIONS
materialCORK OVERALL
outside_diameter0.766 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.621 INCHES NOMINAL IN
cross-sectional_thickness0.281 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-530-7374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T88-108E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 0.621 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: CORK OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.281 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER0.621 INCHES NOMINAL IN
OUTSIDE DIAMETER0.766 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALCORK OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
196151Interchangeable
interchangeable cross-reference
interchangeable
M20000-219-1Interchangeable
interchangeable cross-reference
interchangeable
P1581Interchangeable
interchangeable cross-reference
interchangeable
5307374Interchangeable
Same NIIN cross-reference
interchangeable
638000Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy T88-108E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T88-108E?
T88-108E is a GASKET.
What parts can replace T88-108E?
There are 5 known substitutes for T88-108E: 196151, M20000-219-1, P1581 and 2 more. Substitute compatibility should be verified for your specific system.
Is T88-108E still available?
T88-108E is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T88-108E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026