PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T6S428J

T6S428J — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.219 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-680-7504, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T6S428J
NSN: 5310-00-680-7504
FSC: 5310
CAGE: 11815 — SPS TECHNOLOGIES, LLC DBA CHERRY AEROSPACE DIV DIV CHERRY AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.219 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresINTERNAL WRENCHING
thread_directionRIGHT-HAND
countersink_angle120.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM OVERALL
NSN5310-00-680-7504
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T6S428J · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NUT STYLE: HEXAGON
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 120.0 DEGREES NOMINAL NUT
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
NOMINAL THREAD SIZE0.250 INCHES IN
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
SPECIAL FEATURESINTERNAL WRENCHING
THREAD DIRECTIONRIGHT-HAND
NUT STYLEHEXAGON
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
COUNTERSINK ANGLE120.0 DEGREES NOMINAL NUT
NUT HEIGHT0.219 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
H104InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
L-4-18-9-MInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
433-1792InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
418212-40InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
811-473-011InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
960-48InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy T6S428J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T6S428J?
T6S428J is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace T6S428J?
There are 15 known substitutes for T6S428J: H104, L-4-18-9-M, 433-1792 and 12 more. Substitute compatibility should be verified for your specific system.
Is T6S428J still available?
T6S428J is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T6S428J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026