T62-3011 — CONTROL ASSEMBLY,PUSH-PULL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

T62-3011: CONTROL ASSEMBLY,PUSH-PULL.

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include width: 0.219 INCHES NOMINAL IN, tip_type: FLAT TIP, overall_length: 3.875 INCHES NOMINAL IN, shank_diameter: 0.281 INCHES NOMINAL IN, drive_shank_type: MALE FLATTED ROUND W/NOTCH, special_features: YANKEE DRIVE; MANUAL TOOL. This part is cataloged in the U.S.

Government catalog under NSN 5120-00-242-3270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

T62-3011

NSN: 5120-00-242-3270
FSC: 5120 — Hand Tools, Nonedged, Nonpowered
CAGE: 70766 — BELKNAP INC (USA)

SPECIFICATIONS

width	0.219 INCHES NOMINAL IN
tip_type	FLAT TIP
overall_length	3.875 INCHES NOMINAL IN
shank_diameter	0.281 INCHES NOMINAL IN
drive_shank_type	MALE FLATTED ROUND W/NOTCH
special_features	YANKEE DRIVE; MANUAL TOOL
nondefinitive_spec/std_data	1 TYPE
specification/standard_data	05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	5120-00-242-3270

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.281 INCHES NOMINAL IN

•

DRIVE SHANK TYPE: MALE FLATTED ROUND W/NOTCH

•

TIP TYPE: FLAT TIP

•

SPECIFICATION/STANDARD DATA: 05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

NONDEFINITIVE SPEC/STD DATA: 1 TYPE

•

WIDTH: 0.219 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.281 INCHES NOMINAL IN
DRIVE SHANK TYPE	MALE FLATTED ROUND W/NOTCH
OVERALL LENGTH	3.875 INCHES NOMINAL IN
TIP TYPE	FLAT TIP
SPECIFICATION/STANDARD DATA	05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA	1 TYPE
SPECIAL FEATURES	YANKEE DRIVE; MANUAL TOOL
WIDTH	0.219 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

B107.26Reference document

Same NSN cross-reference

Reference document — Secondary reference

GGG-S-121Reference document

Same NSN cross-reference

Reference document — Secondary reference

B107.600Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

B107.26 TY1Reference document

Same NSN cross-reference

Reference document — Secondary reference

GGG-S-121 TY5CL2SZ4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy T62-3011?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is T62-3011?

T62-3011 is a CONTROL ASSEMBLY,PUSH-PULL.

What parts can replace T62-3011?

There are 5 known substitutes for T62-3011: B107.26, GGG-S-121, B107.600 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for T62-3011?

T62-3011 is cataloged in the U.S. Government catalog under NSN 5120-00-242-3270. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

T62-3011 — CONTROL ASSEMBLY,PUSH-PULL

Request a Quote — T62-3011