PartsTable
Technical Data Sheet
Download PDF

T61537 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T61537: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_style: SQUARE, first_leg_width: 0.596 INCHES MINIMUM AND 6.080 INCHES MAXIMUM IN, first_leg_length: 1.650 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN, second_leg_angle: 150.0 DEGREES NOMINAL, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-258-0155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T61537
NSN: 5340-01-258-0155
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL
first_leg_styleSQUARE
first_leg_width0.596 INCHES MINIMUM AND 6.080 INCHES MAXIMUM IN
first_leg_length1.650 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
second_leg_angle150.0 DEGREES NOMINAL
second_leg_styleSQUARE
style_designatorADJACENT ANGLES
second_leg_length1.950 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.120 INCHES NOMINAL IN
center_section_width0.596 INCHES MINIMUM AND 6.080 INCHES MAXIMUM IN
first_leg_slot_width0.688 INCHES NOMINAL IN
NSN5340-01-258-0155
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T61537 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.470 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.670 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH: 0.796 INCHES MINIMUM AND 0.858 INCHES MAXIMUM IN
•
CENTER SECTION THICKNESS: 0.120 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 150.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.950 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.470 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.670 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH0.796 INCHES MINIMUM AND 0.858 INCHES MAXIMUM IN
CENTER SECTION THICKNESS0.120 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE150.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.531 INCHES NOMINAL IN
SECOND LEG LENGTH1.950 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE SLOT
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.510 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T61537?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T61537?
T61537 is a BRACKET,DOUBLE ANGLE.
What is the NSN for T61537?
T61537 is cataloged in the U.S. Government catalog under NSN 5340-01-258-0155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T61537

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.