PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T5486S
T5486S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.313 INCHES NOMINAL IN, material: STEEL, overall_height: 0.531 INCHES NOMINAL IN, stock_diameter: 0.0625 INCHES NOMINAL IN, style_designator: PIN, casehardening_indicator: NOT CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-360-4561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T5486S
NSN: 5340-00-360-4561
FSC: 5340
CAGE: 55509 — COOPER CAMERON CORP AJAX-SUPERIOR DIV (USA)
SPECIFICATIONS
width0.313 INCHES NOMINAL IN
materialSTEEL
overall_height0.531 INCHES NOMINAL IN
stock_diameter0.0625 INCHES NOMINAL IN
style_designatorPIN
casehardening_indicatorNOT CASEHARDENED
NSN5340-00-360-4561
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T5486S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STOCK DIAMETER: 0.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PIN
•
MATERIAL: STEEL
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STOCK DIAMETER0.0625 INCHES NOMINAL IN
STYLE DESIGNATORPIN
MATERIALSTEEL
CASEHARDENING INDICATORNOT CASEHARDENED
WIDTH0.313 INCHES NOMINAL IN
OVERALL HEIGHT0.531 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
921021-51Interchangeable
interchangeable cross-reference
interchangeable
D1C2955Interchangeable
interchangeable cross-reference
interchangeable
88700Interchangeable
interchangeable cross-reference
interchangeable
SL-1-MPLUSInterchangeable
interchangeable cross-reference
interchangeable
14342AInterchangeable
interchangeable cross-reference
interchangeable
14580 ITEM 2 24INInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T5486S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T5486S?
T5486S is a CLIP,RETAINING.
What parts can replace T5486S?
There are 9 known substitutes for T5486S: 921021-51, D1C2955, 88700 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T5486S?
T5486S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-360-4561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T5486S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026