The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OUTER RING, bore_diameter: 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM IN, contact_angle: 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM, overall_width: 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5120-00-142-3658, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 440C OUTER RING |
| bore_diameter | 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM IN |
| contact_angle | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| overall_width | 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN |
| load_direction | ANGULAR |
| surface_finish | GROUND |
| shield_quantity | 2 |
| special_features | VACUUM IMPREGNATE RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; ONE SHIELD EACH BEARING G |
| style_designator | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| center_hole_diameter | 0.981 INCHES MINIMUM AND 0.993 INCHES MAXIMUM IN |
| bearing_preload_rating | 90.0 POUNDS MINIMUM AND 110.0 POUNDS MAXIMUM LBS |
| cross-sectional_height | 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| NSN | 5120-00-142-3658 |