PartsTable
Technical Data Sheet
Download PDF

T5057H-88-537-SL — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T5057H-88-537-SL: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.880 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 5.375 INCHES NOMINAL IN, end_item_identification: 2320-01-447-6345; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-4244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T5057H-88-537-SL
NSN: 5340-01-500-4244
FSC: 5340 — Hardware, Commercial
CAGE: 14242 — VOSS INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.880 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter5.375 INCHES NOMINAL IN
end_item_identification2320-01-447-6345; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
NSN5340-01-500-4244
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T5057H-88-537-SL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
LOOP INSIDE DIAMETER: 5.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
OVERALL WIDTH0.880 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320-01-447-6345; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
MATERIALSTEEL CORROSION RESISTING OVERALL
LOOP INSIDE DIAMETER5.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
12421379-009Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
12421379Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy T5057H-88-537-SL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T5057H-88-537-SL?
T5057H-88-537-SL is a CLAMP,LOOP.
What parts can replace T5057H-88-537-SL?
There are 2 known substitutes for T5057H-88-537-SL: 12421379-009, 12421379. Substitute compatibility should be verified for your specific system.
What is the NSN for T5057H-88-537-SL?
T5057H-88-537-SL is cataloged in the U.S. Government catalog under NSN 5340-01-500-4244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T5057H-88-537-SL