PartsTable
Technical Data Sheet
Download PDF

T497T — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

T497T: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, thickness: 0.105 INCHES NOMINAL IN, hole_diameter: 0.641 INCHES NOMINAL IN, heat_treatment: HARDENED, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM, overall_diameter: 1.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-196-0462, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T497T
NSN: 5310-01-196-0462
FSC: 5310 — Nuts and Washers
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OVERALL
thickness0.105 INCHES NOMINAL IN
hole_diameter0.641 INCHES NOMINAL IN
heat_treatmentHARDENED
hardness_rating30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
overall_diameter1.062 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-196-0462
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T497T · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.062 INCHES NOMINAL IN
•
HEAT TREATMENT: HARDENED
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1045 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.641 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.062 INCHES NOMINAL IN
HEAT TREATMENTHARDENED
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1045 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.641 INCHES NOMINAL IN
THICKNESS0.105 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T497T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T497T?
T497T is a WASHER,FLAT.
What is the NSN for T497T?
T497T is cataloged in the U.S. Government catalog under NSN 5310-01-196-0462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T497T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.