PartsTable
Technical Data Sheet
Download PDF

T46-1 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T46-1: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 17.230 INCHES NOMINAL IN, length: 27.500 INCHES NOMINAL IN, material: PLASTIC, hole_diameter: 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, securing_device_type: TURNLOCK FASTENER, mounting_opening_shape_style: UNTHREADED HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-701-4139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T46-1
NSN: 5340-00-701-4139
FSC: 5340 — Hardware, Commercial
CAGE: 12849 — TEXSTARS LLC DBA PPG AEROSPACE (USA)
SPECIFICATIONS
width17.230 INCHES NOMINAL IN
length27.500 INCHES NOMINAL IN
materialPLASTIC
hole_diameter0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
securing_device_typeTURNLOCK FASTENER
hole_quantity_along_width6
hole_quantity_along_length8
mounting_opening_shape_styleUNTHREADED HOLE
material_document_and_classificationMIL-P-5425 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-701-4139
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T46-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 27.500 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 8
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5425 MIL SPEC SINGLE MATERIAL RESPONSE
•
SECURING DEVICE TYPE: TURNLOCK FASTENER
•
HOLE QUANTITY ALONG WIDTH: 6
•
WIDTH: 17.230 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
LENGTH27.500 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH8
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5425 MIL SPEC SINGLE MATERIAL RESPONSE
SECURING DEVICE TYPETURNLOCK FASTENER
HOLE QUANTITY ALONG WIDTH6
WIDTH17.230 INCHES NOMINAL IN
MATERIALPLASTIC
HOLE DIAMETER0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
204-030-872-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy T46-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T46-1?
T46-1 is a COVER,ACCESS.
What parts can replace T46-1?
There is 1 known substitute for T46-1: 204-030-872-001. Substitute compatibility should be verified for your specific system.
What is the NSN for T46-1?
T46-1 is cataloged in the U.S. Government catalog under NSN 5340-00-701-4139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T46-1