PartsTable
Technical Data Sheet
Download PDF

T40C75-4565 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T40C75-4565: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.025 INCHES NOMINAL IN, loop_inside_diameter: 4.560 INCHES NOMINAL IN, fastening_device_type: T-BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-809-8067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T40C75-4565
NSN: 5340-00-809-8067
FSC: 5340 — Hardware, Commercial
CAGE: 14242 — VOSS INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 301 BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter4.560 INCHES NOMINAL IN
fastening_device_typeT-BOLT
integral_nut_type_and_quantity4 PLAIN LONG TONGUE
NSN5340-00-809-8067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T40C75-4565 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: T-BOLT
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 4 PLAIN LONG TONGUE
•
MATERIAL: STEEL COMP 301 BAND
•
LOOP INSIDE DIAMETER: 4.560 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPET-BOLT
STYLE DESIGNATORT-BOLT
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY4 PLAIN LONG TONGUE
MATERIALSTEEL COMP 301 BAND
LOOP INSIDE DIAMETER4.560 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
9204029Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy T40C75-4565?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T40C75-4565?
T40C75-4565 is a CLAMP,LOOP.
What parts can replace T40C75-4565?
There is 1 known substitute for T40C75-4565: 9204029. Substitute compatibility should be verified for your specific system.
What is the NSN for T40C75-4565?
T40C75-4565 is cataloged in the U.S. Government catalog under NSN 5340-00-809-8067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T40C75-4565

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.