PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T350
T350 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include control_type: LOCAL, overall_width: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, inclosure_type: ENCASED, overall_height: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, overall_length: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, basic_shape_style: RECTANGULAR OR SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-363-9393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T350
NSN: 5310-00-363-9393
FSC: 5310
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
control_typeLOCAL
overall_width1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
inclosure_typeENCASED
overall_height0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
overall_length1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
basic_shape_styleRECTANGULAR OR SQUARE
installation_designMODULE
operating_temp_range-32.0 TO 85.0 CELSIUS DEGC
frequency_per_channel17.0 MEGAHERTZ NOMINAL OPERATING CHANNEL
average_life_measurementNOT RATED
operating_control_methodMANUAL
circuit_construction_typeSOLID STATE
NSN5310-00-363-9393
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T350 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1233Interchangeable
interchangeable cross-reference
interchangeable
WD75Interchangeable
interchangeable cross-reference
interchangeable
51233Interchangeable
interchangeable cross-reference
interchangeable
SM-A-916574Interchangeable
interchangeable cross-reference
interchangeable
T350Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T350?
T350 is a OSCILLATOR,CRYSTAL CONTROLLED.
What parts can replace T350?
There are 5 known substitutes for T350: 1233, WD75, 51233 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T350?
T350 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-363-9393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T350

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026