PartsTable
Technical Data Sheet
Download PDF

T336014601 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T336014601: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, block_height: 0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN, overall_width: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, overall_length: 3.110 INCHES NOMINAL3.110 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S), surface_treatment: CHROMATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-280-6244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T336014601
NSN: 5340-01-280-6244
FSC: 5340 — Hardware, Commercial
CAGE: 36090 — LOCKHEED MARTIN LIBRASCOPE CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
block_height0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
overall_width0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
overall_length3.110 INCHES NOMINAL3.110 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentCHROMATE
clamping_hole_diameter0.136 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity44
mounting_hole_diameter0.134 INCHES MINIMUM AND 0.134 INCHES MINIMUM AND 0.141 INCHES MAXIMUM0.141 INCHES MAXIMUM IN
mounting_hole_quantity22
material_document_and_classificationQQ-A-225/6,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-280-6244
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T336014601 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 44
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
•
BLOCK HEIGHT: 0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.134 INCHES MINIMUM AND 0.134 INCHES MINIMUM AND 0.141 INCHES MAXIMUM0.141 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
CLAMPING HOLE QUANTITY44
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
BLOCK HEIGHT0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.134 INCHES MINIMUM AND 0.134 INCHES MINIMUM AND 0.141 INCHES MAXIMUM0.141 INCHES MAXIMUM IN
OVERALL LENGTH3.110 INCHES NOMINAL3.110 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER0.136 INCHES NOMINAL ALL HOLES IN
MOUNTING FACILITYUNTHREADED HOLE(S)UNTHREADED HOLE(S)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
B4040772-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T336014601?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T336014601?
T336014601 is a CLAMP,BLOCK,SECTION.
What parts can replace T336014601?
There is 1 known substitute for T336014601: B4040772-1. Substitute compatibility should be verified for your specific system.
What is the NSN for T336014601?
T336014601 is cataloged in the U.S. Government catalog under NSN 5340-01-280-6244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T336014601

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.