PartsTable
Technical Data Sheet
Download PDF

T33399 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T33399: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1018 OVERALL, thread_class: 2A ROD CONNECTION A, tongue_width: 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, thread_length: 1.260 INCHES MINIMUM ROD CONNECTION IN, style_designator: CONNECTOR, thread_direction: RIGHT-HAND ROD CONNECTION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-239-8097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T33399
NSN: 5340-01-239-8097
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1018 OVERALL
thread_class2A ROD CONNECTION A
tongue_width0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
thread_length1.260 INCHES MINIMUM ROD CONNECTION IN
style_designatorCONNECTOR
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.375 INCHES ROD CONNECTION IN
shank_overall_length13.790 INCHES MINIMUM AND 13.830 INCHES MAXIMUM IN
shank_outside_diameter0.375 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
distance_from_end_to_hole_center14.760 INCHES MINIMUM AND 14.840 INCHES MAXIMUM IN
material_document_and_classificationFED STD 676,AISI/SAE FED STD ALL MATERIAL RESPONSES OVERALL
NSN5340-01-239-8097
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T33399 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.260 INCHES MINIMUM ROD CONNECTION IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 676,AISI/SAE FED STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.375 INCHES ROD CONNECTION IN
•
SHANK OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
DISTANCE FROM END TO HOLE CENTER: 14.760 INCHES MINIMUM AND 14.840 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
THREAD LENGTH1.260 INCHES MINIMUM ROD CONNECTION IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 676,AISI/SAE FED STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.375 INCHES ROD CONNECTION IN
SHANK OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER14.760 INCHES MINIMUM AND 14.840 INCHES MAXIMUM IN
SHANK OVERALL LENGTH13.790 INCHES MINIMUM AND 13.830 INCHES MAXIMUM IN
THREAD CLASS2A ROD CONNECTION A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T33399?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T33399?
T33399 is a CONNECTOR,ROD END.
What is the NSN for T33399?
T33399 is cataloged in the U.S. Government catalog under NSN 5340-01-239-8097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T33399

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.