PartsTable
Technical Data Sheet
Download PDF

T302W — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

T302W: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 2.0080 INCHES MINIMUM AND 3.0120 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 1.3670 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: W.OIL HOLE IN BAND ALSO RADIUS AT OBRE 3/32 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-117-0771, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T302W
NSN: 3110-00-117-0771
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter2.0080 INCHES MINIMUM AND 3.0120 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height1.3670 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresW.OIL HOLE IN BAND ALSO RADIUS AT OBRE 3/32 IN. IN
style_designatorTAPERED ROLLERS, BANDED OD
overall_outside_diameter5.2500 INCHES MINIMUM AND 5.2580 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-117-0771
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T302W · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: TAPERED ROLLERS, BANDED OD
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 5.2500 INCHES MINIMUM AND 5.2580 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 2.0080 INCHES MINIMUM AND 3.0120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.3670 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORTAPERED ROLLERS, BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER5.2500 INCHES MINIMUM AND 5.2580 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESW.OIL HOLE IN BAND ALSO RADIUS AT OBRE 3/32 IN. IN
BORE DIAMETER2.0080 INCHES MINIMUM AND 3.0120 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T302W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T302W?
T302W is a BEARING,ROLLER,THRUST.
What is the NSN for T302W?
T302W is cataloged in the U.S. Government catalog under NSN 3110-00-117-0771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T302W

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.