PartsTable
Technical Data Sheet
Download PDF

T2C2-13799-001 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T2C2-13799-001: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYCARBONATE, overall_width: 3.6 INCHES NOMINAL IN, overall_length: 22.8 INCHES NOMINAL IN, overall_thickness: 0.125 INCHES NOMINAL IN, end_item_identification: 5895-01-679-1787, part_name_assigned_by_controlling_agency: FEED HORN MOUNT, 2.4M RADOME, X-BAND, CATCH LEG. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-681-8871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T2C2-13799-001
NSN: 5340-01-681-8871
FSC: 5340 — Hardware, Commercial
CAGE: 3XWN1 — GATR TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYCARBONATE
overall_width3.6 INCHES NOMINAL IN
overall_length22.8 INCHES NOMINAL IN
overall_thickness0.125 INCHES NOMINAL IN
end_item_identification5895-01-679-1787
part_name_assigned_by_controlling_agencyFEED HORN MOUNT, 2.4M RADOME, X-BAND, CATCH LEG
NSN5340-01-681-8871
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T2C2-13799-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYCARBONATE
TECHNICAL CHARACTERISTICS
OVERALL THICKNESS0.125 INCHES NOMINAL IN
OVERALL LENGTH22.8 INCHES NOMINAL IN
OVERALL WIDTH3.6 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYFEED HORN MOUNT, 2.4M RADOME, X-BAND, CATCH LEG
END ITEM IDENTIFICATION5895-01-679-1787
MATERIALPLASTIC POLYCARBONATE
SUBSTITUTES & CROSS-REFERENCES 1
13799 REV BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T2C2-13799-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T2C2-13799-001?
T2C2-13799-001 is a BRACKET,MOUNTING.
What parts can replace T2C2-13799-001?
There is 1 known substitute for T2C2-13799-001: 13799 REV B. Substitute compatibility should be verified for your specific system.
What is the NSN for T2C2-13799-001?
T2C2-13799-001 is cataloged in the U.S. Government catalog under NSN 5340-01-681-8871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T2C2-13799-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.