PartsTable
Technical Data Sheet
Download PDF

T26416 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T26416: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 4.600 INCHES MINIMUM AND 4.760 INCHES MAXIMUM IN, length: 4.920 INCHES MINIMUM AND 5.080 INCHES MAXIMUM IN, material: STEEL COMP 1020, hole_diameter: 0.406 INCHES NOMINAL IN, body_thickness: 0.375 INCHES NOMINAL IN, peripheral_shape_style: RECTANGLE, FOUR HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-258-0183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T26416
NSN: 5340-01-258-0183
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
width4.600 INCHES MINIMUM AND 4.760 INCHES MAXIMUM IN
length4.920 INCHES MINIMUM AND 5.080 INCHES MAXIMUM IN
materialSTEEL COMP 1020
hole_diameter0.406 INCHES NOMINAL IN
body_thickness0.375 INCHES NOMINAL IN
peripheral_shape_styleRECTANGLE, FOUR HOLES
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleUNTHREADED HOLE
distance_between_holes_along_width3.819 INCHES NOMINAL IN
distance_between_holes_along_length3.858 INCHES MINIMUM AND 4.094 INCHES MAXIMUM IN
material_document_and_classificationJDM 1020,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE
distance_from_first_hole_centerline_to_end_along_width0.430 INCHES NOMINAL IN
NSN5340-01-258-0183
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T26416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.430 INCHES NOMINAL IN
•
LENGTH: 4.920 INCHES MINIMUM AND 5.080 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 3.858 INCHES MINIMUM AND 4.094 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 3.819 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: JDM 1020,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.450 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.430 INCHES NOMINAL IN
LENGTH4.920 INCHES MINIMUM AND 5.080 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG LENGTH3.858 INCHES MINIMUM AND 4.094 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG WIDTH3.819 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONJDM 1020,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.450 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
WIDTH4.600 INCHES MINIMUM AND 4.760 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T26416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T26416?
T26416 is a COVER,ACCESS.
What is the NSN for T26416?
T26416 is cataloged in the U.S. Government catalog under NSN 5340-01-258-0183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T26416

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.