PartsTable
Technical Data Sheet
Download PDF

T2500 — BEARING,WASHER,THRUST

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

T2500: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 1.5000 INCHES NOMINAL IN, material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE ALL CORNERS, overall_depth: 13.000 INCHES NOMINAL IN, overall_width: 8.500 INCHES NOMINAL IN, overall_height: 2.400 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-662-9491, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ T2500
NSN: 3120-00-662-9491
NIINs: 006629491, 013583522
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 70417 — CHRYSLER CORP AMPLEX DIV (USA)
SPECIFICATIONS
diameter1.5000 INCHES NOMINAL IN
materialOIL LUBRICATING LUBRICATION
corner_shapeSQUARE ALL CORNERS
overall_depth13.000 INCHES NOMINAL IN
overall_width8.500 INCHES NOMINAL IN
overall_height2.400 INCHES NOMINAL IN
outside_diameter2.5000 INCHES NOMINAL IN
style_designatorROUND
ac_voltage_rating115.0 VOLTS NOMINAL LOCATION NOT OTHERWISE SPECIFIED
overall_thickness0.2500 INCHES NOMINAL IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-00-662-9491
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: T2500 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
OVERALL THICKNESS: 0.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
DIAMETER: 1.5000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 2.5000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.2500 INCHES NOMINAL IN
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15016 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
DIAMETER1.5000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER2.5000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
CENTER HOLE SHAPE STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
1007-59RPC106EReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy T2500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T2500?
T2500 is a BEARING,WASHER,THRUST. It is classified as a MRO (MRO_GENERAL).
What parts can replace T2500?
There is 1 known substitute for T2500: 1007-59RPC106E. Substitute compatibility should be verified for your specific system.
What is the NSN for T2500?
T2500 is cataloged in the U.S. Government catalog under NSN 3120-00-662-9491. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T2500

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.