PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T25-9-32
T25-9-32 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STAPLE is a the manufacturer industrial component. Key specifications include material: STEEL, head_style: ROUND, ROUND STOCK, sterilized: NO, point_style: NEEDLE, stock_shape: RECTANGULAR, stock_diameter: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-022-2038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T25-9-32
NSN: 5315-01-022-2038
FSC: 5315
CAGE: 83294 — ARROW FASTENER COMPANY, INC. (USA)
SPECIFICATIONS
materialSTEEL
head_styleROUND, ROUND STOCK
sterilizedNO
point_styleNEEDLE
stock_shapeRECTANGULAR
stock_diameter0.050 INCHES NOMINAL IN
fastener_length0.281 INCHES NOMINAL IN
surface_treatment_locationOVERALL
inside_distance_between_prongs0.250 INCHES NOMINAL IN
NSN5315-01-022-2038
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T25-9-32 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STERILIZED: NO
•
STOCK DIAMETER: 0.050 INCHES NOMINAL IN
•
POINT STYLE: NEEDLE
•
HEAD STYLE: ROUND, ROUND STOCK
•
INSIDE DISTANCE BETWEEN PRONGS: 0.250 INCHES NOMINAL IN
•
STOCK SHAPE: RECTANGULAR
•
MATERIAL: STEEL
•
FASTENER LENGTH: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STERILIZEDNO
STOCK DIAMETER0.050 INCHES NOMINAL IN
POINT STYLENEEDLE
HEAD STYLEROUND, ROUND STOCK
INSIDE DISTANCE BETWEEN PRONGS0.250 INCHES NOMINAL IN
STOCK SHAPERECTANGULAR
MATERIALSTEEL
FASTENER LENGTH0.281 INCHES NOMINAL IN
SURFACE TREATMENT LOCATIONOVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
25-932Interchangeable
interchangeable cross-reference
interchangeable
JANR94Interchangeable
interchangeable cross-reference
interchangeable
RV4ANFK253AInterchangeable
interchangeable cross-reference
interchangeable
110262Interchangeable
interchangeable cross-reference
interchangeable
5310PL1371213Interchangeable
interchangeable cross-reference
interchangeable
5310PL0815645Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T25-9-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T25-9-32?
T25-9-32 is a STAPLE.
What parts can replace T25-9-32?
There are 10 known substitutes for T25-9-32: 25-932, JANR94, RV4ANFK253A and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T25-9-32?
T25-9-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-022-2038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T25-9-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026