PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T22101
T22101 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.125 INCHES NOMINAL IN, outside_diameter: 1.129 INCHES NOMINAL IN, housing_bore_diameter: 1.125 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-074-2600, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T22101
NSN: 5330-00-074-2600
FSC: 5330
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.125 INCHES NOMINAL IN
outside_diameter1.129 INCHES NOMINAL IN
housing_bore_diameter1.125 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
NSN5330-00-074-2600
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T22101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.129 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.125 INCHES NOMINAL IN
•
SEAL WIDTH: 0.125 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.129 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.125 INCHES NOMINAL IN
SEAL WIDTH0.125 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
13650Interchangeable
interchangeable cross-reference
interchangeable
100636Interchangeable
interchangeable cross-reference
interchangeable
920012-55Interchangeable
interchangeable cross-reference
interchangeable
520-SSInterchangeable
interchangeable cross-reference
interchangeable
1122531Interchangeable
interchangeable cross-reference
interchangeable
520Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T22101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T22101?
T22101 is a SEAL,PLAIN ENCASED.
What parts can replace T22101?
There are 21 known substitutes for T22101: 13650, 100636, 920012-55 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T22101?
T22101 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-074-2600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T22101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026