PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T2208H112
T2208H112 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, bolt_circle_diameter: 14.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.006 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, gasket_center_to_flat_distance: 7.438 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-9872, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T2208H112
NSN: 5330-00-358-9872
FSC: 5330
CAGE: 54845 — HOIST LIFTRUCK MFG INC (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
bolt_circle_diameter14.250 INCHES NOMINAL IN
cross-sectional_thickness0.006 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
gasket_center_to_flat_distance7.438 INCHES NOMINAL IN
NSN5330-00-358-9872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T2208H112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: CELLULOSE OVERALL
•
HOLE DIAMETER: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
GASKET CENTER TO FLAT DISTANCE: 7.438 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 14.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.006 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCELLULOSE OVERALL
HOLE DIAMETER0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
GASKET CENTER TO FLAT DISTANCE7.438 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER14.250 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.006 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
DS-934401Interchangeable
interchangeable cross-reference
interchangeable
5233Interchangeable
interchangeable cross-reference
interchangeable
AQM60FS440-4CInterchangeable
interchangeable cross-reference
interchangeable
1611203PC22Interchangeable
interchangeable cross-reference
interchangeable
AN381-3-8Interchangeable
interchangeable cross-reference
interchangeable
58D5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy T2208H112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T2208H112?
T2208H112 is a GASKET.
What parts can replace T2208H112?
There are 29 known substitutes for T2208H112: DS-934401, 5233, AQM60FS440-4C and 26 more. Substitute compatibility should be verified for your specific system.
Is T2208H112 still available?
T2208H112 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T2208H112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026