PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T2175
T2175 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REACTOR is a the manufacturer industrial component. Key specifications include body_length: 0.720 INCHES NOMINAL IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, inclosure_type: FULLY INCLOSED, inductance_type: FIXED, mounting_method: UNTHREADED HOLE(S) SINGLE GROUP, frequency_rating: 31.5 KILOHERTZ NOMINAL SINGLE COMPONENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-427-2880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T2175
NSN: 5330-00-427-2880
FSC: 5330
CAGE: 20076 — TITAN WHEEL CORPORATION OF ILLINOIS (USA)
SPECIFICATIONS
body_length0.720 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
inductance_typeFIXED
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating31.5 KILOHERTZ NOMINAL SINGLE COMPONENT
winding_quantity1 SINGLE COMPONENT
inductance_rating300.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
body_outside_diameter1.125 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
maximum_operating_temp130.0 CELSIUS DEGC
mounting_hole_diameter0.140 INCHES NOMINAL SINGLE GROUP IN
NSN5330-00-427-2880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T2175 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
3768-AInterchangeable
interchangeable cross-reference
interchangeable
3768Interchangeable
interchangeable cross-reference
interchangeable
70-10654FLInterchangeable
interchangeable cross-reference
interchangeable
4320PL1372582Interchangeable
interchangeable cross-reference
interchangeable
470-106542Interchangeable
interchangeable cross-reference
interchangeable
624VLD00596Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T2175?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T2175?
T2175 is a REACTOR.
What parts can replace T2175?
There are 17 known substitutes for T2175: 3768-A, 3768, 70-10654FL and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T2175?
T2175 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-427-2880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T2175

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026