PartsTable
Technical Data Sheet
Download PDF

T205-803 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

T205-803: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 INNER RING, bore_diameter: 1.0620 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN, inner_ring_width: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, special_features: 0.0008 TO 0.0015 RADIAL PLAY, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-391-2163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T205-803
NSN: 3110-01-391-2163
NIINs: 013912163, 015687551
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 INNER RING
bore_diameter1.0620 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
seal_quantity2
inner_ring_width0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
special_features0.0008 TO 0.0015 RADIAL PLAY
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
end_item_identification2320-01-558-5671; 850J TIER CRAWLER, DOZER
overall_outside_diameter1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyHOSE
NSN3110-01-391-2163
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T205-803 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
SEAL QUANTITY: 2
•
BORE DIAMETER: 1.0620 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEAL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
OUTER RING WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
SPECIAL FEATURES0.0008 TO 0.0015 RADIAL PLAY
SEAL QUANTITY2
BORE DIAMETER1.0620 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL COMP E52100 OUTER RING
MATERIALSTEEL COMP 440C BALL
SUBSTITUTES & CROSS-REFERENCES 1
657978Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T205-803?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T205-803?
T205-803 is a BEARING,BALL,AIRFRAME.
What parts can replace T205-803?
There is 1 known substitute for T205-803: 657978. Substitute compatibility should be verified for your specific system.
What is the NSN for T205-803?
T205-803 is cataloged in the U.S. Government catalog under NSN 3110-01-391-2163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T205-803