PartsTable
Technical Data Sheet
PartsTable / MRO / T2001
T2001 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include diameter: 1.0160 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, design_type: FRICTION, corner_shape: SQUARE ALL CORNERS, outside_diameter: 2.0000 INCHES NOMINAL IN, style_designator: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-018-2880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ T2001
NSN: 5340-00-018-2880
FSC: 5340
CAGE: 01943 — MOELLER MFG CO INC (USA)
SPECIFICATIONS
diameter1.0160 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
design_typeFRICTION
corner_shapeSQUARE ALL CORNERS
outside_diameter2.0000 INCHES NOMINAL IN
style_designatorROUND
overall_thickness0.1250 INCHES NOMINAL IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataII TYPE AND 1PI GRADE
material_document_and_classificationMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
tube_outside_diameter_for_which_designed0.937 INCHES NOMINAL IN
NSN5340-00-018-2880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T2001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER AND STEEL
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.25 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.937 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER AND STEEL
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.25 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.937 INCHES NOMINAL IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
52001Upgraded Successor
successor cross-reference
successor
52007Upgraded Successor
successor cross-reference
successor
26M02-7006 ITEM 23Upgraded Successor
successor cross-reference
successor
51863Interchangeable
interchangeable cross-reference
interchangeable
R26343Interchangeable
interchangeable cross-reference
interchangeable
R1885SNInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T2001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T2001?
T2001 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace T2001?
There are 21 known substitutes for T2001: 52001, 52007, 26M02-7006 ITEM 23 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T2001?
T2001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-018-2880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T2001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026