PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T199
T199 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, head_style: KNURLED NO. 1, head_height: 0.656 INCHES NOMINAL IN, thread_class: 2A A, bore_diameter: 2.0100 INCHES NOMINAL IN, head_diameter: 1.188 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6492, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T199
NSN: 3110-00-289-6492
FSC: 3110
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
materialSTEEL WASHER
head_styleKNURLED NO. 1
head_height0.656 INCHES NOMINAL IN
thread_class2A A
bore_diameter2.0100 INCHES NOMINAL IN
head_diameter1.188 INCHES NOMINAL IN
thread_length2.906 INCHES MINIMUM IN
alignment_typeRIGID
overall_height0.6250 INCHES NOMINAL IN
surface_finishUNGROUND
fastener_length3.000 INCHES NOMINAL IN
special_featuresW.0 OIL HOLES IN BAND ALSO 0.030 IN. BORE CORNER RADIUS ALSO UNGROUND IN
NSN3110-00-289-6492
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T199 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: UNGROUND
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
OVERALL OUTSIDE DIAMETER: 2.9375 INCHES MINIMUM IN
•
STYLE DESIGNATOR: TAPERED ROLLERS, BANDED OD
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHUNGROUND
SPECIAL FEATURESW.0 OIL HOLES IN BAND ALSO 0.030 IN. BORE CORNER RADIUS ALSO UNGROUND IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.9375 INCHES MINIMUM IN
STYLE DESIGNATORTAPERED ROLLERS, BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
BORE DIAMETER2.0100 INCHES NOMINAL IN
MATERIALSTEEL ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
00T199Interchangeable
interchangeable cross-reference
interchangeable
T199Interchangeable
interchangeable cross-reference
interchangeable
H10Interchangeable
interchangeable cross-reference
interchangeable
2611Interchangeable
interchangeable cross-reference
interchangeable
TTSP T199Interchangeable
Same NIIN cross-reference
interchangeable
9AT199Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T199?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T199?
T199 is a BEARING,ROLLER,THRUST.
What parts can replace T199?
There are 9 known substitutes for T199: 00T199, T199, H10 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T199?
T199 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T199

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026