PartsTable
Technical Data Sheet
Download PDF

T19764 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T19764: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.219 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, special_features: ADDITIONAL HOLE AT TWISTED END (OPPOSITE LOOP),0.320 IN. DIA IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.048 INCHES NOMINAL IN, loop_inside_diameter: 0.390 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-203-2383, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T19764
NSN: 5340-01-203-2383
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
diameter0.219 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
special_featuresADDITIONAL HOLE AT TWISTED END (OPPOSITE LOOP),0.320 IN. DIA IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.048 INCHES NOMINAL IN
loop_inside_diameter0.390 INCHES NOMINAL IN
material_document_and_classificationJDM A4-3SK,FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end2.310 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.000 INCHES NOMINAL IN
NSN5340-01-203-2383
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T19764 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: JDM A4-3SK,FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.219 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.310 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 BAND
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONJDM A4-3SK,FSCM 75160 MFR REF SINGLE MATERIAL RESPONSE BAND
DIAMETER0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.310 INCHES NOMINAL IN
SPECIAL FEATURESADDITIONAL HOLE AT TWISTED END (OPPOSITE LOOP),0.320 IN. DIA IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
LOOP INSIDE DIAMETER0.390 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T19764?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T19764?
T19764 is a CLAMP,LOOP.
What is the NSN for T19764?
T19764 is cataloged in the U.S. Government catalog under NSN 5340-01-203-2383. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T19764

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.