PartsTable
Technical Data Sheet
Download PDF

T15-L200A — SHAFT ASSEMBLY,SHOULDERED

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

T15-L200A: SHAFT ASSEMBLY,SHOULDERED.

The SHAFT ASSEMBLY,SHOULDERED is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, nut_style: TUBE COUPLING, nut_height: 2.000 INCHES NOMINAL IN, thread_class: 2B, thread_series: UN, special_features: DRY FILM LUBE PER MIL-L-8937 AND DYE RED OR YELLOW. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-210-7820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T15-L200A
NSN: 4730-01-210-7820
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 08118 — EATON AVIATION CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
nut_styleTUBE COUPLING
nut_height2.000 INCHES NOMINAL IN
thread_class2B
thread_seriesUN
special_featuresDRY FILM LUBE PER MIL-L-8937 AND DYE RED OR YELLOW
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
fabrication_methodMACHINED
width_across_flats2.700 INCHES NOMINAL IN
nominal_thread_size2.500 INCHES IN
drilled_hole_diameter0.062 INCHES NOMINAL IN
NSN4730-01-210-7820
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: T15-L200A · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 2.700 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.500 INCHES IN
•
NUT HEIGHT: 2.000 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS2.700 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.500 INCHES IN
NUT HEIGHT2.000 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.062 INCHES NOMINAL IN
SPECIAL FEATURESDRY FILM LUBE PER MIL-L-8937 AND DYE RED OR YELLOW
SURFACE TREATMENTANODIZE OVERALL
NUT STYLETUBE COUPLING
SUBSTITUTES & CROSS-REFERENCES 3
T15-200AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
757578Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
757578-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy T15-L200A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T15-L200A?
T15-L200A is a SHAFT ASSEMBLY,SHOULDERED.
What parts can replace T15-L200A?
There are 3 known substitutes for T15-L200A: T15-200A, 757578, 757578-5. Substitute compatibility should be verified for your specific system.
What is the NSN for T15-L200A?
T15-L200A is cataloged in the U.S. Government catalog under NSN 4730-01-210-7820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T15-L200A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.