PartsTable
Technical Data Sheet
Download PDF

T1451 — TRANSFORMER,POWER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

T1451: TRANSFORMER,POWER.

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.547 INCHES NOMINAL IN, thread_class: 2B, overall_width: 1.675 INCHES MINIMUM AND 1.735 INCHES MAXIMUM IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-9755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T1451
NSN: 5310-00-021-9755
NIINs: 000219755, 003280258
FSC: 5310 — Nuts and Washers
CAGE: 04285 — ATHEY PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.547 INCHES NOMINAL IN
thread_class2B
overall_width1.675 INCHES MINIMUM AND 1.735 INCHES MAXIMUM IN
thread_seriesUNF
inclosure_typeFULLY INCLOSED
overall_height1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
overall_length2.295 INCHES MINIMUM AND 2.325 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
thread_directionRIGHT-HAND
NSN5310-00-021-9755
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T1451 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.500 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
NUT HEIGHT: 0.547 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.500 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
NUT HEIGHT0.547 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH14
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
219755Reference document
Same NSN cross-reference
Reference document — Secondary reference
14345CReference document
Same NSN cross-reference
Reference document — Secondary reference
H30Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILB857TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy T1451?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T1451?
T1451 is a TRANSFORMER,POWER.
What parts can replace T1451?
There are 4 known substitutes for T1451: 219755, 14345C, H30 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T1451?
T1451 is cataloged in the U.S. Government catalog under NSN 5310-00-021-9755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T1451