PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T132624
T132624 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 3.210 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN, first_hole_diameter: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN, pin_overall_diameter: 0.9820 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM IN, second_hole_diameter: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-428-9518, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T132624
NSN: 5315-01-428-9518
FSC: 5315
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OVERALL
first_end_styleCHAMFERED
pin_overall_length3.210 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN
first_hole_diameter0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
pin_overall_diameter0.9820 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM IN
second_hole_diameter0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
distance_from_centerline_of_hole_to_end_of_pin0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
NSN5315-01-428-9518
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T132624 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.210 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN
•
SECOND HOLE DIAMETER: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1045 OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.210 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN
SECOND HOLE DIAMETER0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1045 OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
CENTER TO CENTER DISTANCE BETWEEN HOLES2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
12885Interchangeable
interchangeable cross-reference
interchangeable
A12885Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T132624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T132624?
T132624 is a PIN,STRAIGHT,HEADLESS.
What parts can replace T132624?
There are 2 known substitutes for T132624: 12885, A12885. Substitute compatibility should be verified for your specific system.
What is the NSN for T132624?
T132624 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-428-9518. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T132624

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026