PartsTable
Technical Data Sheet
Download PDF

T115109 — LEVER,LOCK-RELEASE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T115109: LEVER,LOCK-RELEASE.

The LEVER,LOCK-RELEASE is a the manufacturer industrial component. Key specifications include width: 0.6900 INCHES NOMINAL IN, length: 0.8100 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.1930 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN, style_designator: FLAT CONCAVE, material_thickness: 0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-423-0590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T115109
NSN: 5340-01-423-0590
NIINs: 014230590, 014363535
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
width0.6900 INCHES NOMINAL IN
length0.8100 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.1930 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
hole_quantity1
style_designatorFLAT CONCAVE
material_thickness0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM IN
NSN5340-01-423-0590
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T115109 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.8100 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT CONCAVE
•
MATERIAL THICKNESS: 0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM IN
•
WIDTH: 0.6900 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE QUANTITY: 1
•
HOLE DIAMETER: 0.1930 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.8100 INCHES NOMINAL IN
STYLE DESIGNATORFLAT CONCAVE
MATERIAL THICKNESS0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM IN
WIDTH0.6900 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE QUANTITY1
HOLE DIAMETER0.1930 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T115109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T115109?
T115109 is a LEVER,LOCK-RELEASE.
What is the NSN for T115109?
T115109 is cataloged in the U.S. Government catalog under NSN 5340-01-423-0590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T115109

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.