PartsTable
Technical Data Sheet
Download PDF

T107L — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

T107L: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.768 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN, outside_diameter: 1.240 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.070 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN, nondefinitive_spec/std_data: A TYPE. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-018-0610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T107L
NSN: 5310-00-018-0610
FSC: 5310 — Nuts and Washers
CAGE: 78550 — TIMPTE INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
hole_diameter0.768 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
outside_diameter1.240 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.070 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
nondefinitive_spec/std_dataA TYPE
NSN5310-00-018-0610
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T107L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: -QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.240 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.070 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.768 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION-QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.240 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
MATERIAL THICKNESS0.070 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.768 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
MILW6986TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
180610Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1232Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy T107L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T107L?
T107L is a WASHER,LOCK.
What parts can replace T107L?
There are 3 known substitutes for T107L: MILW6986TYPEA, 180610, 1232. Substitute compatibility should be verified for your specific system.
What is the NSN for T107L?
T107L is cataloged in the U.S. Government catalog under NSN 5310-00-018-0610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T107L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.