PartsTable
Technical Data Sheet
Download PDF

T100-3 — SWITCH,TOGGLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

T100-3: SWITCH,TOGGLE.

The SWITCH,TOGGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, body_style: BUSHING MOUNT, body_length: 0.782 INCHES NOMINAL IN, body_diameter: 0.750 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, actuator_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-008-6683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T100-3
NSN: 3110-00-008-6683
NIINs: 000086683, 005837786
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 4ZKN9 — AUBURN BEARING AND MANUFACTURING INC DIV AUBURN BEARING & MANUFACTURING (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
body_styleBUSHING MOUNT
body_length0.782 INCHES NOMINAL IN
body_diameter0.750 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
actuator_styleROUND
alignment_typeRIGID
bushing_length0.453 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height0.750 INCHES NOMINAL IN
overall_length2.219 INCHES NOMINAL IN
surface_finishGROUND
NSN3110-00-008-6683
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T100-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: 4 POINT BALL CONTACT
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 0.7500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
LARGEST BORE DIAMETER: 0.7813 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6875 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATOR4 POINT BALL CONTACT
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
BORE SMALLEST DIAMETER0.7500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
LARGEST BORE DIAMETER0.7813 INCHES NOMINAL IN
SPECIAL FEATURESBANDED OD
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T100-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T100-3?
T100-3 is a SWITCH,TOGGLE.
What is the NSN for T100-3?
T100-3 is cataloged in the U.S. Government catalog under NSN 3110-00-008-6683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T100-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.