PartsTable
Technical Data Sheet
Download PDF

T009-3-16 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

T009-3-16: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-397-5901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T009-3-16
NSN: 5305-01-397-5901
FSC: 5305 — Screws
CAGE: 97928 — HUCK INTL INC (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.345 INCHES NOMINAL IN
fastener_length1.330 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-397-5901
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: T009-3-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.330 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.345 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.330 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
THREAD LENGTH0.345 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 6
PBF1417-3-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SC3102-3-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
123743-3-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC1652-3-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A174-3-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SLB146-3-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T009-3-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T009-3-16?
T009-3-16 is a SCREW,CLOSE TOLERANCE.
What parts can replace T009-3-16?
There are 6 known substitutes for T009-3-16: PBF1417-3-16, SC3102-3-16, 123743-3-16 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T009-3-16?
T009-3-16 is cataloged in the U.S. Government catalog under NSN 5305-01-397-5901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T009-3-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.