PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T-96A
T-96A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, special_features: COUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN, length_under_shoulder: 1.125 INCHES NOMINAL IN, end_item_identification: 6625-01-484-2782, THIRD ECHELON TEST SYSTEM, open_end_inside_diameter: 3.200 INCHES NOMINAL IN, closed_end_overall_diameter: 3.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-7226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T-96A
NSN: 5340-00-290-7226
FSC: 5340
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialPLASTIC
special_featuresCOUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN
length_under_shoulder1.125 INCHES NOMINAL IN
end_item_identification6625-01-484-2782, THIRD ECHELON TEST SYSTEM
open_end_inside_diameter3.200 INCHES NOMINAL IN
closed_end_overall_diameter3.562 INCHES NOMINAL IN
specification/standard_data80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
part_name_assigned_by_controlling_agencyCAP PLUG T-SERIES LPE
NSN5340-00-290-7226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T-96A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPEN END INSIDE DIAMETER: 3.200 INCHES NOMINAL IN
•
CLOSED END OVERALL DIAMETER: 3.562 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
SPECIFICATION/STANDARD DATA: 80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
•
LENGTH UNDER SHOULDER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OPEN END INSIDE DIAMETER3.200 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER3.562 INCHES NOMINAL IN
END ITEM IDENTIFICATION6625-01-484-2782, THIRD ECHELON TEST SYSTEM
MATERIALPLASTIC
SPECIFICATION/STANDARD DATA80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
PART NAME ASSIGNED BY CONTROLLING AGENCYCAP PLUG T-SERIES LPE
SPECIAL FEATURESCOUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN
LENGTH UNDER SHOULDER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MILC52078Upgraded Successor
successor cross-reference
successor
RU51089Upgraded Successor
successor cross-reference
successor
28901-17Upgraded Successor
successor cross-reference
successor
21Upgraded Successor
successor cross-reference
successor
MIL-C-5501Upgraded Successor
successor cross-reference
successor
57AUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T-96A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T-96A?
T-96A is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace T-96A?
There are 26 known substitutes for T-96A: MILC52078, RU51089, 28901-17 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T-96A?
T-96A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-7226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T-96A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026