PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T-5610
T-5610 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MUFFLER,EXHAUST is a the manufacturer industrial component. Key specifications include material: STEEL LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, body_shape: ROUND, design_type: DRY, coolant_type: AIR, hole_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-291-9869, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T-5610
NSN: 5310-00-291-9869
FSC: 5310
CAGE: 72260 — CORBITT CO INC (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
thickness0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
body_shapeROUND
design_typeDRY
coolant_typeAIR
hole_diameter0.500 INCHES NOMINAL IN
tube_quantity2
inlet_locationON SIDE OF BODY 4.000 IN. C OF INLET TO END OF BODY IN
muffler_designBAFFLE
overall_length22.500 INCHES NOMINAL IN
baffle_quantity1
outlet_locationCENTRALLY LOCATED IN END SECTION OF BODY
NSN5310-00-291-9869
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: T-5610 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
MATERIAL: CELLULOSE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
PERIPHERAL SHAPE STYLE: ROUND
•
MINIMUM TENSILE STRENGTH: 6000 POUNDS PER SQUARE INCH LBS
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,TYPE 3,NO. +3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
MATERIALCELLULOSE OVERALL
CENTER HOLE SHAPE STYLEROUND
PERIPHERAL SHAPE STYLEROUND
MINIMUM TENSILE STRENGTH6000 POUNDS PER SQUARE INCH LBS
OVERALL DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,TYPE 3,NO. +3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
241421Interchangeable
interchangeable cross-reference
interchangeable
214886Interchangeable
interchangeable cross-reference
interchangeable
342207Interchangeable
interchangeable cross-reference
interchangeable
224148Interchangeable
interchangeable cross-reference
interchangeable
T-5610Interchangeable
interchangeable cross-reference
interchangeable
HCF-5662-BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy T-5610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T-5610?
T-5610 is a MUFFLER,EXHAUST.
What parts can replace T-5610?
There are 15 known substitutes for T-5610: 241421, 214886, 342207 and 12 more. Substitute compatibility should be verified for your specific system.
Is T-5610 still available?
T-5610 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T-5610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026