PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T-34
T-34 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The COUPLING,SHAFT,FLEXIBLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, tip_width: 0.375 INCHES NOMINAL IN, bore_shape: STRAIGHT BOTH ENDS, bonnet_type: INSIDE SPRING, bore_length: 1.0937 INCHES NOMINAL THROUGH BORE IN, design_type: CLAMPING HUB. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T-34
NSN: 3110-00-156-1487
FSC: 3110
CAGE: 51600 — REGAL BELOIT AMERICA, INC. DBA ROLLWAY BEARING (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
tip_width0.375 INCHES NOMINAL IN
bore_shapeSTRAIGHT BOTH ENDS
bonnet_typeINSIDE SPRING
bore_length1.0937 INCHES NOMINAL THROUGH BORE IN
design_typeCLAMPING HUB
bore_diameter0.1248 INCHES NOMINAL FIRST END IN
overall_width5.0 MILLIMETERS NOMINAL MM
tip_thickness0.062 INCHES NOMINAL IN
alignment_typeRIGID
load_directionRADIAL
overall_height1.7500 INCHES NOMINAL IN
NSN3110-00-156-1487
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T-34 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 4.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
OVERALL OUTSIDE DIAMETER: 7.0000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL WASHER
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER4.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL OUTSIDE DIAMETER7.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL WASHER
MATERIALSTEEL OR STEEL CORROSION RESISTING RETAINER
STYLE DESIGNATORFLAT RACE SURFACE, CYLINDRICAL ROLLERS
MATERIALSTEEL ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
1576-1Interchangeable
interchangeable cross-reference
interchangeable
67613Interchangeable
interchangeable cross-reference
interchangeable
AN5538-1Interchangeable
interchangeable cross-reference
interchangeable
8022080Interchangeable
interchangeable cross-reference
interchangeable
5120-00-243-7338Interchangeable
interchangeable cross-reference
interchangeable
GGG-B-001222Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T-34?
T-34 is a COUPLING,SHAFT,FLEXIBLE.
What parts can replace T-34?
There are 24 known substitutes for T-34: 1576-1, 67613, AN5538-1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T-34?
T-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026