PartsTable
Technical Data Sheet
Download PDF

SY080010ER30ML1 — STRAINER,SEDIMENT

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

SY080010ER30ML1: STRAINER,SEDIMENT.

The STRAINER,SEDIMENT is a the manufacturer industrial component. Key specifications include material: STEEL BODY, body_length: 7.380 INCHES NOMINAL IN, mounting_type: UNTHREADED HOLE SIDE, style_designator: Y STRAINER W/BLOW-OFF PLUG, operating_pressure: 600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS, mounting_hole_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-345-5778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SY080010ER30ML1
NSN: 4730-01-345-5778
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL BODY
body_length7.380 INCHES NOMINAL IN
mounting_typeUNTHREADED HOLE SIDE
style_designatorY STRAINER W/BLOW-OFF PLUG
operating_pressure600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
mounting_hole_diameter0.750 INCHES NOMINAL IN
mounting_hole_quantity2
media_for_which_designedANY ACCEPTABLE
first_intake_connection_typeRAISED FACE FLANGE SIDE
first_intake_flange_thickness0.690 INCHES NOMINAL IN
criticality_code_justificationZZZY
first_intake_flange_face_styleRAISED
NSN4730-01-345-5778
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: SY080010ER30ML1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET: 4.880 INCHES NOMINAL IN
•
FIRST INTAKE FLANGE RAISED FACE DIAMETER: 2.000 INCHES NOMINAL IN
•
FIRST INTAKE FLANGE THICKNESS: 0.690 INCHES NOMINAL IN
•
FIRST INTAKE FLANGE OUTSIDE DIAMETER: 4.880 INCHES NOMINAL IN
•
FIRST INTAKE CONNECTION TYPE: RAISED FACE FLANGE SIDE
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
STYLE DESIGNATOR: Y STRAINER W/BLOW-OFF PLUG
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET4.880 INCHES NOMINAL IN
FIRST INTAKE FLANGE RAISED FACE DIAMETER2.000 INCHES NOMINAL IN
FIRST INTAKE FLANGE THICKNESS0.690 INCHES NOMINAL IN
FIRST INTAKE FLANGE OUTSIDE DIAMETER4.880 INCHES NOMINAL IN
FIRST INTAKE CONNECTION TYPERAISED FACE FLANGE SIDE
CRITICALITY CODE JUSTIFICATIONZZZY
STYLE DESIGNATORY STRAINER W/BLOW-OFF PLUG
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A216 ASSN STD SINGLE MATERIAL RESPONSE BODY
MOUNTING HOLE DIAMETER0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
SY080010ER30MReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SY080010ER30ML1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SY080010ER30ML1?
SY080010ER30ML1 is a STRAINER,SEDIMENT.
What parts can replace SY080010ER30ML1?
There is 1 known substitute for SY080010ER30ML1: SY080010ER30M. Substitute compatibility should be verified for your specific system.
What is the NSN for SY080010ER30ML1?
SY080010ER30ML1 is cataloged in the U.S. Government catalog under NSN 4730-01-345-5778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SY080010ER30ML1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.