SWAL1010-02LV — WASHER,RECESSED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

SWAL1010-02LV: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, outside_diameter: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 90.0 DEGREES NOMINAL, material_thickness: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-652-9333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SWAL1010-02LV

NSN: 5310-00-652-9333
FSC: 5310 — Nuts and Washers
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY OVERALL
hole_diameter	0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
outside_diameter	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
style_designator	RECESSED BOTH SIDES
top_recess_angle	90.0 DEGREES NOMINAL
material_thickness	0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
bottom_recess_angle	90.0 DEGREES NOMINAL
top_recess_diameter	0.166 INCHES NOMINAL IN
bottom_recess_diameter	0.166 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	NAVY SPECIAL PROJECT
NSN	5310-00-652-9333

COMPONENT DIAGRAM

KEY FEATURES

•

TOP RECESS DIAMETER: 0.166 INCHES NOMINAL IN

•

BOTTOM RECESS DIAMETER: 0.166 INCHES NOMINAL IN

•

TOP RECESS ANGLE: 90.0 DEGREES NOMINAL

•

STYLE DESIGNATOR: RECESSED BOTH SIDES

•

OUTSIDE DIAMETER: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN

•

BOTTOM RECESS ANGLE: 90.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

TOP RECESS DIAMETER	0.166 INCHES NOMINAL IN
BOTTOM RECESS DIAMETER	0.166 INCHES NOMINAL IN
TOP RECESS ANGLE	90.0 DEGREES NOMINAL
STYLE DESIGNATOR	RECESSED BOTH SIDES
OUTSIDE DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE	90.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATERIAL	ALUMINUM ALLOY OVERALL
HOLE DIAMETER	0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

CVC754B20E10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SWAL1010-02LV?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SWAL1010-02LV?

SWAL1010-02LV is a WASHER,RECESSED.

What parts can replace SWAL1010-02LV?

There is 1 known substitute for SWAL1010-02LV: CVC754B20E10. Substitute compatibility should be verified for your specific system.

What is the NSN for SWAL1010-02LV?

SWAL1010-02LV is cataloged in the U.S. Government catalog under NSN 5310-00-652-9333. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SWAL1010-02LV — WASHER,RECESSED

Request a Quote — SWAL1010-02LV