PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SW33556-6
SW33556-6 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, outside_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: ZINC OVERALL, material_thickness: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-371-7179, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SW33556-6
NSN: 5310-01-371-7179
FSC: 5310
CAGE: 98255 — DRS SUSTAINMENT SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
outside_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentZINC OVERALL
material_thickness0.010 INCHES NOMINAL IN
NSN5310-01-371-7179
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SW33556-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
444944Interchangeable
interchangeable cross-reference
interchangeable
205267Interchangeable
interchangeable cross-reference
interchangeable
27146Interchangeable
interchangeable cross-reference
interchangeable
5094Interchangeable
interchangeable cross-reference
interchangeable
271.46Interchangeable
interchangeable cross-reference
interchangeable
A-27147Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SW33556-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SW33556-6?
SW33556-6 is a WASHER,LOCK.
What parts can replace SW33556-6?
There are 6 known substitutes for SW33556-6: 444944, 205267, 27146 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SW33556-6?
SW33556-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-371-7179. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SW33556-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026